Publications (19) Publications in which a researcher has participated

filter_list Mechanics of Materials

2024

  1. Influence of profile modification on the transmission error of spur gears under surface wear

    Mechanism and Machine Theory, Vol. 191

2023

  1. Analytical model for meshing stiffness, load sharing, and transmission error for helical gears with profile modification

    Mechanism and Machine Theory, Vol. 185

  2. Determination of the AGMA J-factor for Internal Spur Gears

    American Gear Manufacturers Association Fall Technical Meeting 2023, FTM 2023

2022

  1. Influence of meshing stiffness on load distribution between planets of planetary gear drives

    Mechanism and Machine Theory, Vol. 170

  2. Minimum friction losses in wind turbine gearboxes

    Forschung im Ingenieurwesen/Engineering Research, Vol. 86, Núm. 3, pp. 321-330

2021

  1. Modelo de reparto de carga y error de transmisión para engranajes helicoidales con rebaje de punta

    Revista iberoamericana de ingeniería mecánica, Vol. 25, Núm. 2, pp. 29-47

2019

  1. Strength model for bending and pitting calculations of internal spur gears

    Mechanism and Machine Theory, Vol. 133, pp. 691-705

2017

  1. Load sharing model for spur gears with tip relief an investigation on the influence of profile modifications on the mesh stiffness

    VDI Berichte

  2. On the determination of the meshing stiffness and the load sharing of spur gears

    Mechanisms and Machine Science

2013

  1. Contact stress calculation of high transverse contact ratio spur and helical gear teeth

    Mechanism and Machine Theory, Vol. 64, pp. 93-110

2011

  1. Contact stress calculation of undercut spur and helical gear teeth

    Mechanism and Machine Theory, Vol. 46, Núm. 11, pp. 1633-1646

  2. Critical stress and load conditions for pitting calculations of involute spur and helical gear teeth

    Mechanism and Machine Theory, Vol. 46, Núm. 4, pp. 425-437

2010

  1. Load distribution model along the line of contact for involute external gears

    Mechanism and Machine Theory, Vol. 45, Núm. 5, pp. 780-794

2009

  1. Modelo analítico de rendimiento de engranajes rectos convencionales

    Revista iberoamericana de ingeniería mecánica, Vol. 13, Núm. 1, pp. 27-38

2007

  1. Calculation of tooth bending strength and surface durability of high transverse contact ratio spur and helical gear drives

    Journal of Mechanical Design, Transactions of the ASME, Vol. 129, Núm. 1, pp. 69-74

2005

  1. Application of modified geometry of face gear drive

    Computer Methods in Applied Mechanics and Engineering, Vol. 194, Núm. 27-29, pp. 3047-3066

2003

  1. New approach for the dimensional synthesis of gear basic surfaces

    Mechanism and Machine Theory, Vol. 38, Núm. 3, pp. 213-225

2000

  1. Approximate method for the determination of the bending strength geometry factor for external spur and helical gear teeth

    Journal of Mechanical Design, Transactions of the ASME, Vol. 122, Núm. 3, pp. 331-336

1999

  1. Determination of the ISO tooth form factor for involute spur and helical gears

    Mechanism and Machine Theory, Vol. 34, Núm. 1, pp. 89-103