Publicaciones en las que colabora con Mariano Artés Gómez (14)

2012

  1. Procesamiento de señales: guía interactiva para ingenieros

    UNED - Universidad Nacional de Educación a Distancia

2011

  1. An intelligent system for faulty-bearing detection based on vibration spectra

    JVC/Journal of Vibration and Control, Vol. 17, Núm. 6, pp. 931-942

  2. Evaluación del tiempo y el esfuerzo en asignaturas de los primeros cursos de ingeniería mecánica

    Avances en la adaptación de la UNED al EEES: II Redes de investigación en innovación docente 2007-2008

  3. Extraction of rules for faulty bearing classification by a Neuro-Fuzzy approach

    Mechanical Systems and Signal Processing, Vol. 25, Núm. 6, pp. 2073-2082

2010

  1. An intelligent detection and classification system of faulty bearings

    ASME International Mechanical Engineering Congress and Exposition, Proceedings

  2. Load distribution model along the line of contact for involute external gears

    Mechanism and Machine Theory, Vol. 45, Núm. 5, pp. 780-794

  3. Optimal frequencies selection method applied in the diagnosis of incipient gear failure

    17th International Congress on Sound and Vibration 2010, ICSV 2010

2004

  1. Determination of the effective path of contact of undercut involute gear teeth

    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 218, Núm. 7, pp. 751-760

2003

  1. Influence of undercut on the load capacity for involute teeth with small pressure angle

    Proceedings of the ASME Design Engineering Technical Conference

2002

  1. Rotating machinery failure detection using different vibration analysis techniques

    Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA

1996

  1. Approximate equation for the addendum modification factors for tooth gears with balanced specific sliding

    Mechanism and Machine Theory, Vol. 31, Núm. 7, pp. 925-935

  2. Determination of the addendum modification factors for gears with pre-established contact ratio

    Mechanism and Machine Theory, Vol. 31, Núm. 7, pp. 937-945

1994

  1. Computerized graphic method for the analysis of gear design

    Mechanism and Machine Theory, Vol. 29, Núm. 1, pp. 59-71

1990

  1. Database System for Mechanical Design

    Applied Informatics