Publications (78) Publications in which a researcher has participated

2024

  1. Analytical model of meshing stiffness, load sharing, and transmission error for internal spur gears with profile modification

    Mechanism and Machine Theory, Vol. 197

  2. Influence of profile modification on the transmission error of spur gears under surface wear

    Mechanism and Machine Theory, Vol. 191

2023

  1. A Distance Teaching Experience in Gear Design with Autodesk Inventor

    Mechanisms and Machine Science

  2. Analysis of the tip interference in low gear ratio internal spur gears with profile modification

    VDI Berichte, Vol. 2023, Núm. 2422, pp. 957-974

  3. Analysis of the tip interference in low gear ratio internal spur gears with profile modification

    Forschung im Ingenieurwesen/Engineering Research, Vol. 87, Núm. 3, pp. 891-900

  4. Analytical model for meshing stiffness, load sharing, and transmission error for helical gears with profile modification

    Mechanism and Machine Theory, Vol. 185

  5. Determination of the AGMA J-factor for Internal Spur Gears

    American Gear Manufacturers Association Fall Technical Meeting 2023, FTM 2023

  6. Influencia de la profundidad de rebaje en la rigidez, reparto de carga y error de transmisión de engranajes rectos con desgaste

    Revista iberoamericana de ingeniería mecánica, Vol. 27, Núm. 2, pp. 85-107

  7. Theoretical analysis of transmission error in rack and pinion systems

    MATEC Web of Conferences

2022

  1. Analytical Model for Spur Gears with Profile Modification: Simulation of the Meshing Stiffness, Load Sharing, and Transmission Error

    Mechanisms and Machine Science

  2. Diseño de una reductora para vehículo eléctrico con motor en rueda

    Revista DYNA, Vol. 97, Núm. 4, pp. 374-379

  3. Influence of Wear on Load Sharing and Transmission Error of Spur Gears with Profile Modifications

    Mechanisms and Machine Science

  4. Influence of meshing stiffness on load distribution between planets of planetary gear drives

    Mechanism and Machine Theory, Vol. 170

  5. Minimum Friction Losses in Planetary Stages of Wind Turbine Gearboxes

    Mathematical Problems in Engineering, Vol. 2022

  6. Minimum friction losses in wind turbine gearboxes

    Forschung im Ingenieurwesen/Engineering Research, Vol. 86, Núm. 3, pp. 321-330

  7. Simulación de la rigidez de engrane, error de transmisión y reparto de carga para engranajes helicoidales con dentadura rebajada

    Revista iberoamericana de ingeniería mecánica, Vol. 26, Núm. 2, pp. 13-24

2021

  1. Analytical model for meshing stiffness, load sharing, and transmission error for spur gears with profile modification under non-nominal load conditions

    Applied Mathematical Modelling, Vol. 97, pp. 344-365

  2. Modelo de reparto de carga y error de transmisión para engranajes helicoidales con rebaje de punta

    Revista iberoamericana de ingeniería mecánica, Vol. 25, Núm. 2, pp. 29-47

2020

  1. Analytical simulation of the tooth contact of spur gears

    Mechanisms and Machine Science (Springer), pp. 115-131

  2. Control of transmission error of high contact ratio spur gears with symmetric profile modifications

    Mechanism and Machine Theory, Vol. 149