Publicaciones en las que colabora con JOSE IGNACIO PEDRERO MOYA (42)

2024

  1. Analytical model of meshing stiffness, load sharing, and transmission error for internal spur gears with profile modification

    Mechanism and Machine Theory, Vol. 197

  2. Influence of profile modification on the transmission error of spur gears under surface wear

    Mechanism and Machine Theory, Vol. 191

2023

  1. A Distance Teaching Experience in Gear Design with Autodesk Inventor

    Mechanisms and Machine Science

  2. Analysis of the tip interference in low gear ratio internal spur gears with profile modification

    Forschung im Ingenieurwesen/Engineering Research, Vol. 87, Núm. 3, pp. 891-900

  3. Analysis of the tip interference in low gear ratio internal spur gears with profile modification

    VDI Berichte, Vol. 2023, Núm. 2422, pp. 957-974

  4. Analytical model for meshing stiffness, load sharing, and transmission error for helical gears with profile modification

    Mechanism and Machine Theory, Vol. 185

  5. Influencia de la profundidad de rebaje en la rigidez, reparto de carga y error de transmisión de engranajes rectos con desgaste

    Revista iberoamericana de ingeniería mecánica, Vol. 27, Núm. 2, pp. 85-107

2022

  1. Influence of Wear on Load Sharing and Transmission Error of Spur Gears with Profile Modifications

    Mechanisms and Machine Science

  2. Influence of meshing stiffness on load distribution between planets of planetary gear drives

    Mechanism and Machine Theory, Vol. 170

  3. Minimum Friction Losses in Planetary Stages of Wind Turbine Gearboxes

    Mathematical Problems in Engineering, Vol. 2022

  4. Minimum friction losses in wind turbine gearboxes

    Forschung im Ingenieurwesen/Engineering Research, Vol. 86, Núm. 3, pp. 321-330

  5. Simulación de la rigidez de engrane, error de transmisión y reparto de carga para engranajes helicoidales con dentadura rebajada

    Revista iberoamericana de ingeniería mecánica, Vol. 26, Núm. 2, pp. 13-24

2021

  1. Analytical model for meshing stiffness, load sharing, and transmission error for spur gears with profile modification under non-nominal load conditions

    Applied Mathematical Modelling, Vol. 97, pp. 344-365

2020

  1. Analytical simulation of the tooth contact of spur gears

    Mechanisms and Machine Science (Springer), pp. 115-131

  2. Control of transmission error of high contact ratio spur gears with symmetric profile modifications

    Mechanism and Machine Theory, Vol. 149

  3. Load sharing and quasi-static transmission error of non-standard tooth height spur gears

    Mechanisms and Machine Science (Springer), pp. 231-238

2019

  1. Influence of profile modifications on meshing stiffness, load sharing, and trasnsmission error of involute spur gears

    Mechanism and Machine Theory, Vol. 139, pp. 506-525

  2. Load sharing model for high contact ratio spur gears with long profile modifications

    Forschung im Ingenieurwesen/Engineering Research, Vol. 83, Núm. 3, pp. 401-408

  3. Load transfer among spur gear teeth with tip relief under non-nominal loading conditions

    Mechanisms and Machine Science (Springer Netherlands), pp. 299-306

  4. Strength model for bending and pitting calculations of internal spur gears

    Mechanism and Machine Theory, Vol. 133, pp. 691-705